Header Ads

Breaking News

The Ultimate Surround Sound Guide: Every Format Fully Explained

It was the summer of ’69. We’re not talking about the Bryan Adams song here; we’re actually referring to the first time surround sound became available in the home. It was called Quadraphonic sound and it first appeared on reel-to-reel tape. Unfortunately, Quadraphonic sound, which provided discrete sound from four speakers placed in each corner of a room, was confusing and short-lived — no thanks to companies battling over formats (sound familiar?).

Immersion in a three-dimensional audio sphere was not to be given up on, however. In 1982, Dolby Laboratories introduced Dolby Surround, a technology that piggybacked a surround sound signal onto a stereo source through a process called matrix encoding. Since then, Dolby, DTS, and others have helped advance the state of home surround sound with a variety of iterations. With so many options, though, the technology remains confusing for many. From basic 5.1 to Dolby Atmos setups with multiple overhead speakers, it’s a lot to wrap your head around. Our detailed guide aims to provide a little clarity to help you on your surround-sound quest.

Surround sound 101

The speakers

Surround sound, at its most basic, involves a set of stereo front speakers (left and right) and a set of surround speakers, which are usually placed just to the sides and just behind a central listening position. The next step up involves the addition of a center channel: A speaker placed between the front left and right speakers that is primarily responsible for reproducing dialogue in movies. Thus, we have five speakers involved. We’ll be adding more speakers later (lots more, actually), but for now, we can use this basic five-speaker arrangement as a springboard for getting into the different formats.


For the purposes of this discussion, “matrix” has nothing to do with the Keanu Reeves. In this case, matrix refers to the encoding of separate sound signals within a stereo source. This approach was the basis for early surround-sound formats like Dolby Surround and Dolby Pro Logic and was motivated in part by the limited space for discrete information on early audio-video media, such as the VHS tape.

Pro Logic

Using the matrix process, Dolby’s Pro Logic surround was developed to encode separate signals within the main left and right channels. Dolby was able to allow home audio devices to decode two extra channels of sound from media like VHS tapes, which fed the center channel and surround speakers with audio. Because of the limited space, matrixed surround signals came with some limitations. The surround channels in basic Pro Logic were not in stereo and had limited bandwidth. That means that each speaker played the same thing and the sound didn’t involve much bass or treble information.

5.1: Surround takes shape

Dolby Digital 5.1 / AC-3: The benchmark

Remember LaserDisc? Though the medium was first invented in 1978, it wasn’t until 1983, when Pioneer Electronics bought a majority interest in the technology, that it enjoyed any kind of success in North America. One of the advantages of LaserDisc (LD) is that it provided a lot more storage space than VHS tape. Dolby took advantage of this and created AC-3, now known better as Dolby Digital. This format improved on Pro-Logic in that it allowed for stereo surround speakers that could provide higher bandwidth sound. It also facilitated the addition of a low-frequency effects channel, adding the “.1” in 5.1, which is handled by a subwoofer. All of the information in Dolby Digital 5.1 is discrete for each channel — no matrixing necessary.

With the release of Clear and Present Danger on LaserDisc, the first Dolby Digital surround sound hit home theaters. By the time DVDs came out in 1997, Dolby Digital had become the default surround sound format. To this day, Dolby Digital 5.1 is considered by many to be the surround sound standard, still included on most Blu-ray discs.

5-1-dolby-setupImage courtesy of Dolby

DTS: The rival

What’s a technology market without a little competition? Dolby more or less dominated the surround-sound landscape for years. Then, in 1993, DTS (Digital Theater Systems) came along, providing its own digital surround-sound mixing services for movie production, first hitting theaters with Jurassic Park. The technology eventually trickled down to LD and DVD but was initially available on a very limited selection of discs. DTS uses a higher bit rate and, therefore, delivers more audio information. Think of it as similar to the difference between listening to a 256kbps and 320kbps MP3 file. The quality difference is noticeable, but as with so many audio-related comparisons, not everyone is sold on it.

6.1: Kicking it up a notch

In an effort to enhance surround sound by expanding the “soundstage,” 6.1 added another sound channel. The sixth speaker was to be placed in the center of the back of a room and was subsequently referred to as a back surround or rear surround. This is where a lot of confusion began to swirl around surround sound.

People were already used to thinking of and referring to surround speakers (incorrectly) as “rears,” because they were so often seen placed behind a seating area. Recommended speaker placement, however, has always called for surround speakers to be placed to the sides and just behind the listening position.

The point of the sixth speaker is to give the listener the impression that something is approaching from behind or disappearing to the rear. Calling the sixth speaker a “back surround” or “surround back” speaker, while technically an accurate description, ended up being just plain confusing.

To make things even more confusing, each company offered different versions of 6.1 surround. Dolby Digital and THX collaborated to create a version referred to as “EX” or “surround EX.” It uses the tried-and-true matrix encoding method to embed the sixth channel inside the left and right surround signals.

DTS, on the other hand, offered two separate 6.1 versions. DTS-ES Discrete and DTS-ES Matrix perform as their names suggest. With ES Discrete, specific sound information is programmed onto a DVD or Blu-ray disc, while DTS-ES Matrix uses the same technique as Dolby Digital EX to extrapolate information from the surround channels.

7.1: The spawn of Blu-ray


Just when people started getting used to 6.1, 7.1 came along in conjunction with HD-DVD and Blu-ray discs as the new must-have surround format, essentially supplanting its predecessor. Like 6.1, there are several different versions of 7.1, all of which add in a second back-surround speaker.

Those surround effects that once went to just one rear surround speaker could now go to two speakers in stereo. The information is discrete, which means that every speaker is getting its own specific information — we can thank the massive storage potential of Blu-ray for that.

Those who bought a dedicated back-surround speaker, now found themselves shopping for a new matched pair of back surrounds — typically the exact same model they had bought for the left and right surrounds.

Dolby offers two different 7.1 surround versions. Dolby Digital Plus is the “lossy” version. Instead of using matrixing, it applies lossy compression to all of the discrete audio channels, which helps to take up less space on a Blu-ray disc. Dolby TrueHD, on the other hand, is lossless. Since no compression is involved, Dolby TrueHD is intended to be identical to the studio master.

DTS also has two 7.1 versions, which differ in the same manner as Dolby’s versions. DTS-HD is a lossy, compressed 7.1 surround format, whereas DTS-Master HD is lossless and meant to be identical to the studio master.

It’s important to note here that 7.1-channel surround mixes are not always included on Blu-ray discs. Movie studios have to opt to mix for 7.1, and don’t always do so. There are other factors involved, too. Storage space is chief among them. If a bunch of extras are placed on a disc, there may not be space for the additional surround information. In many cases, a 5.1 mix can be expanded to 7.1 by a matrix process in an A/V receiver. This way, those back surround speakers get used, even if they don’t get discrete information. This is becoming less common, however, especially when it comes to 4K Ultra HD Blu-ray discs, which often support multiple seven-channel mixes.

9.1: Pro Logic makes a comeback

svs ultra tower surround family

If you’ve been shopping for a receiver, you may have noticed that many offer one or more different versions of Pro Logic processing. In the modern Pro Logic family, we now have Pro Logic II, Pro Logic IIx, and Pro Logic IIz. Let’s take a quick look at what each of them does.

Pro Logic II

Using the same matrixed four-channel sound as Pro Logic, Pro Logic II can create a 5.1 surround sound mix from a stereo source. Pro Logic II also has another trick up its sleeve: It can separate the surround signal into stereo left and right channels instead of Pro Logic’s dual-mono presentation. This processing mode is commonly used when watching non-HD TV channels with a stereo-only audio mix.

Pro Logic IIx

If your video source is presented in 5.1 surround — and your home theater system supports additional speakers — Pro Logic IIx can take that mix and expand it to 6.1 or 7.1. Pro Logic IIx is subdivided into a movie, music and game mode.

Pro Logic IIz

Pro Logic IIz allows the addition of two “front height” speakers that are placed above and between the main stereo speakers. This form of matrix processing aims to add more depth and space to a soundtrack by outputting sounds from a whole new location in the room. Since IIz processing can be engaged with a 7.1 soundtrack, the resulting format could be called 9.1.

Despite the addition of these height channels, Pro Logic IIz does not enable a true 3D placement of sounds. To enable that, you’ll need Dolby Atmos or DTS:X, which we describe below.

What about 7.2, 9.2 or 11.2?

As we mentioned previously, the “.1” in 5.1, 7.1, and all the others refers to the LFE (low-frequency effects) channel in a surround soundtrack, which is handled by a subwoofer. Adding “.2” simply means that a receiver has two subwoofer outputs. Both connections put out the same information since, as far as Dolby and DTS are concerned, there is only one subwoofer track. Since A/V receiver manufacturers want to easily market the additional subwoofer output, the notion of using “.2” was adopted.

For most people, the presence of a single subwoofer will provide ample low-end bass and rumble. However, adding a second sub can enhance this effect, especially in larger media rooms. Check out our subwoofer placement guide to learn why a second sub might be right for you.

Audyssey DSX and DSX 2

Audyssey, a company best known for its auto-calibration software found in many of today’s A/V receivers, has its own surround solution called Audyssey DSX. DSX also allows for additional speakers beyond the core 5.1 and 7.1 surround formats, upmixing 5.1 and 7.1 signals to add more channels. With the addition of front width and front height channels on top of a 7.1 system, Audyssey allows for 11.1 channels of surround sound.

There’s also Audyssey DSX 2, which adds upmixing of stereo signals to surround sound. With the advent of object-based 3D formats like Dolby Atmos and DTS:X in recent years, however (see below), Audyssey has seen a decline.

3D/object-based surround sound

image courtesy Dolby Labs
image courtesy Dolby Labs

The latest and greatest development in surround sound is known both as “object-based” or “3D” surround. For viewers, “3D” offers the best description of this technology because of its ability to make sounds feel as though they are moving through space. You can distinctly hear a helicopter take off from in front of you, hover over your head, and then disappear into the distance behind you.

“Object-based” is a better name for the sound professionals who create these 3D soundtracks because it describes their ability to move a single sound-producing object (like the helicopter) anywhere in 3D space.

This immersive hemisphere of sound is made possible by adding discrete channels for ceiling-mounted or ceiling-facing speakers in A/V receivers at home.

Because these channels no longer need to extrapolate their signals from audio running to other speakers as they did with Pro Logic IIz 7.1, they get their own number. A 5.1.2 system, for example, would feature the traditional five channels and a subwoofer, but would also feature two additional speakers adding height information in stereo at the front. A 5.1.4 system would add four additional height channels to 5.1, including two at the front, two at the rear, and so on.

Dolby Atmos

Atmos in theaters

This shouldn’t come as a surprise after reading the rest of this article, but Dolby is the current leader in object-based surround sound technology. In a theater outfitted with Dolby Atmos, up to 128 distinct sound objects can be represented in a given scene, which can be routed to 64 different speakers. In the past, if there was an explosion on the right side of the screen, half of the theater would hear the same sound. With Atmos, the sounds in a theater will come from distinct locations based on where they’re placed by professional audio mixers.

Atmos in the home

Onkyo 7.2-channel 4K AV Dolby Atmos receiver

Atmos began to be available in A/V receivers in 2015, in a much more limited capacity than the professional format. As mentioned above, the most common configurations are 5.1.2 or 5.1.4, which add two and four height speakers to a traditional 5.1 surround setup respectively, though Dolby supports much larger configurations. Atmos took off relatively quickly, and now, most A/V receivers above the low-end range of the spectrum now support the format. In fact, every receiver on the list of our favorite A/V receivers supports Atmos, even models priced at $500 or less.

In 2015, Yamaha introduced the first Atmos-capable soundbar, the YSP-5600, which uses up-firing drivers to bounce sound off the ceiling.  Since then, soundbar manufacturers have fully embraced Dolby Atmos. Some achieve the Atmos effect using dedicated wireless surround speakers with up-firing drivers to complement the front speakers in the bar. Others use a technique known as virtualized Dolby Atmos to convincingly simulate the Atmos effect using fewer speakers.

Some TVs, like LG’s line of superb OLED TVs, claim Dolby Atmos support through the TV’s built-in speakers. Because Dolby Atmos can be calibrated for as few as two channels, we suppose this is technically accurate. However, buyers should be aware that two-channel Atmos will never sound as good as discrete 5.1.2 or better Atmos.

Movies with Dolby Atmos soundtracks are now very common on Blu-ray and Ultra HD Blu-ray discs and streaming sites like Netflix, Vudu, Amazon Prime Video, Disney+, and Apple TV+ all offer a selection of Atmos movies and shows. Atmos is even starting to appear in some live broadcasts. Recent examples include the 2018 Winter Olympics, the NHRA’s live drag-racing events, and music festivals too.

One thing to keep in mind with Dolby Atmos: It’s a finicky beast. In order to hear Dolby Atmos sound, every part of your home theater system — from the source to the speakers — needs to support it. Here’s our full guide to getting great Dolby Atmos sound.

Dolby Atmos Music

Though still in its early stages, Dolby Labs has been working with major record labels and streaming services to develop the use of Dolby Atmos technology for music production. The concept is simple: Dolby Atmos Music uses all of the same object-oriented 3D audio tools as the movie soundtrack version of Dolby Atmos but puts them in the hands of professional music producers.

The result is immersive music that goes well beyond what traditional two-channel stereo or even Quadrophonic sound can achieve. Unfortunately, Dolby Atmos Music is very limited at the moment. The only way to hear it using a Dolby Atmos-equipped home theater is to buy one of the very few Blu-ray discs that contain a Dolby Atmos Music mix, like the recently remastered and re-released Kick by INXS.

Amazon Music HD recently became the first music streaming service to offer Dolby Atmos Music tracks, but the only way you can hear them is via Amazon’s Echo Studio 3D smart speaker.

In a few select clubs, Dolby Atmos Music is being used by DJs and other live performers to produce an immersive music environment for dance floors.

Hopefully, Dolby will soon open the floodgates on Dolby Atmos Music and find more ways for folks to experience it.

It’s worth noting that Sony also has a 3D immersive music format known as Sony 360 Reality Audio that competes with Dolby Atmos Music. It too can be found on some streaming services, but as with Atmos Music, the devices needed to hear it are limited to just a few options for the moment.


Just as it does with other types of surround sound, DTS has its own version of object-based audio, DTS:X, unveiled in 2015. While Dolby Atmos limits objects to 128 per scene in theaters, DTS:X imposes no such limits (though whether film mixers are finding themselves bumping up against Atmos’ limitations is questionable). DTS:X also aims to be more flexible and accessible than Atmos, making use of pre-existing speaker layouts in theaters and supporting up to 32 different speaker configurations in the home.

While DTS:X was previously tacked on in updates for Atmos-enabled A/V receivers, it’s now available with newer A/V receivers right out of the box. Companies like Lionsgate and Paramount offer home releases in DTS:X, but its lack of widespread adoption on disc-based media — and zero adoption among streaming services — is its biggest limiting factor given that almost all A/V receivers now support it.

DTS Virtual:X

DTS also recognizes that not all movie lovers have the space or the time to put together an object-based sound system. Research gathered by DTS showed that less than 30 percent of customers actually connect height speakers to their systems, and less than 48 percent bother even connecting surround speakers.

To that end, the company developed DTS Virtual:X, which employs Digital Signal Processing (DSP) in an aim to provide the same spatial cues that a traditional DTS:X system could provide, but over a smaller number of speakers, even if you’ve only got two. This technology first rolled out in soundbars, which makes sense as they often only include a separate subwoofer and maybe a pair of satellite speakers at most. Since then, companies like Denon and Marantz have added support for DTS Virtual:X to their receivers, while Sony has its own virtual surround soundbar that reads DTS:X and Atmos mixes.

Technically speaking, “virtualized” Dolby Atmos and DTS Virtual:X are very similar, however, Dolby prefers not to distinguish between Dolby Atmos implementations. As far as Dolby is concerned, Atmos is Atmos, whether it’s virtualized through two, three, or five channels, or fully baked using a discrete 5.1.2 or better speaker system.


Even if you may not have heard of Auro-3D until now, it was on the scene way before DTS:X or Atmos appeared. The technology was announced initially in 2006 for use in theaters, but they didn’t offer it for home theater systems. Thanks to Denon and Marantz pushing it through as a firmware upgrade, you can now use it with your home speakers though you have to pay for it.

Despite apparent likeness to Dolby Atmos, the Auro-3D creates a surround-sound experience through a three-tiered sound system. Multiple speakers really showcase this kind of layered sound. We recommend eleven speakers to get the most out of the sound, making Auro-3D the most expensive setup you can recreate at home. Because Auro-3D usually uses a single overhead channel, its speaker configurations aren’t optimal when used with Dolby Atmos sound.

We haven’t seen a growth in popularity for Auro-3D in the United States, but considering its pervasive usage in Europe and Japan, it’s only a matter of time.

Editors’ Recommendations

Source Link


  1. Your blog is very valuable which you have shared here. I appreciate your efforts which you have put into this article and also it is a gainful article for us. Thank you for sharing this article here. sound equipment hire Melbourne

  2. Your blog is very valuable which you have shared here about .tool rental philadelphia, I appreciate your efforts which you have put into this article and also it is a gainful article for us. Thank you for sharing this article here.